Tubular Materials Withstanding Pressure Testing Machine

Detailed Product Description

1.Uses:The machine is mainly used for all kinds of plastic pipes at a constant temperature and pressure transient performance of the bursting pressure of the determination of the plastic pipe manufacturers, tertiary institutions, the quality of scientific research units and units of essential equipment.

2. Standards:

3. Main technical specifications:

3.1 Maxi. Capacity: 10Mpa (It can be choosen by the customer)

3.2 Grips:

Diameter of pipe: 16~630mm

The grips materials can be Aluminum, 45# chrome steel, stainless steel;

3.3 Test station: 3 stations or chosen by the customer

3.4 Pressure accuracy: ≤±1%

3.5 Constant pressure range: 0.2Mpa~Maxi capacity

3.6 Constant pressure accuracy: -1%~+2%

3.7 Conctant Temp. range: Room Temp.~95 or 20~95

3.8 Temp. accuracy: ±1

3.9 Temp. eveness: ±1

3.10 Time range:11000

3.11 Timeaccuracy≤±0.1% 

3.12 Power supply: 3 phase, 380v±10%, 50Hz

4. Functions and features:

4.1 Single control, it can be set different testing force and testing time seperately. Unpack any station during test process.

4.2  Double-solenoid valve contorl, ensure the stability of pressure.

4.3  It can save the test data and condition when the power is off; it can continue to finish the test when the power is on.

4.4 It can check the test condition during the tets process.

4.5 3 buffer design, it can make the pressure ti be more stable.

4.6 The water and power is separated, is much safer.

4.7 It can record the test result and print the result in standard format.

4.8 Install the grips easily, reliablly and sealing well.

4.9 Rotary piston pump, supply the pressure uniformly and smoothly.

4.10 Reserve the data interface, it can connect with internet directly and share the resources.

5. Main configuration:

5.1 Pressure pump system                             1 set

5.2 High-pressure water solenoid valve (German)        6 pcs

5.3 High-precision sensor                              4 pcs

5.4 Water pressure buffer(stainless steel, special)        3 pcs

5.5 Accumlator(Large and small anti-corrosion type)     4 pcs

5.6 Horizontal high and constant temperature test water tank 1 set

5.7 Electric hoist lifting device, riding escalator          1 set

5.8 Heater(Stainless steel)

5.9 Circulating pump( Stainless steel centrifugal pump)   1 set

6. Main technical features:

6.1 The computer control the load, keep, fill, isolate,unload and  record the testing force, time and so on.

6.2 It can solve the emergency timely, ensure to be safe; the computer can record the test time, batch, number, test result, operator and so on, enquiry and stastic, in order to be management.

6.3  Dynamic screen display dynamic test process, in order to be monitor by the remote user.

6.4  It can generate and print the test result and report automatically.

6.5  Start the load pump(set the testing force), add and keep pressure to all the accumlator. The computer will control to add pressure when some pressure is reached P-2%P of setting pressure.

6.6 It can do the test for 1000 hours, and the computer can start by the power. It means: when the power is off, the system can store the current test results; when the power is on, the computer can start automatically, and can continue to run the test from last step and no need to monitor by people.

7. Grip parameter:

7.1 Seal for out diameter: fit for the test tube, whose roundness is better.

7.2 Seal for inside diameter: fit for the test tube, whose roundness is better.

7.3 Taper seal and compound seal: fit for the test tube, whose roundnedss is not better.

8. Functions and features:

8.1 Control by each station, the testing force and time can be set separately. It does not effect each other.

8.2 It can be control manually and by computer. Thus can ensure operate the machine if the computer is wrong. LED display.

8.3 It can store the test data and condition if the power is off, it can continue the test if the powe is on. Thus can ensure the continuity.

8.4 It can check the test consition at real-time during the test process.

8.5 Record the test result and print it in standard format.

8.6 Preserve the data interface,the enterface can connect with the internet and share the resources.

8.7 The pressure pump system supply the pressure stablly.

8.8 The two solenoid control every station and ensure the the pressure stablity.

8.9 Three buffer design. The pressure is much more stable and the range is much woder.

8.10 Every specimen of each station can be changed at any moment. Meanwhile, the test will not be affected.

8.11 Install the grips easily, grip stablly and seal well.

8.12 The water and power is seperated, is much safer.

The whole machine include three parts.

A  host machine XGY-10 with 3 stations, it can do 3 test at the same time. If you want 4 or more than 4 stations, please tell me.

B water tank: it has different size    110~400

C grips Aluminum, 45# chrome steel, stainless steel;

Size: 16~40, 50~75, 90~110, 125~160, 180~250, 280~355, 400, 500, ≥630

About all the above A,B and C, please choose you order and tell me. Then I can give the best quotation for you.